FMCH: 3round / 5round / 7round
Band V-clamp top closure.
Side in and side out.
With pressure gauge on the inlet&outlet.
FEATURES
• Designed for industrial and commercial application.
• Stainless steel 304/316L heavy duty construction.
• Band V-clamp top closure for change cartridge out quickly.
• Various pipe fitting accessories for easy installation.
• The cartridge cup adapter can be eliminate bypass.
• Standard housings accept OD2.5″ DOE cartridge.
Specification
• Material grade: stainless steel 304/316L.
• Max. Working pressure: 150psi(10bar)@250 F(120℃).
• Max. working temperature: 250°F(120℃)
• O-ring: standard is Buna-N; EPDM, Viton, Teflon is option
• Finish: standard is polished coat; Electro polisged, glass bead is option.
• Connection:standard is MNPT threaded; MBSP threaded/victaulic/ferrule/RF flange is option.
• Cartridge:accept DOE, 10~40” melt blown&wound cartridge
Data sheet
| Modul | Qty.(length) of Cartridge (1) | Max.Flow/GPM (2) | Inlet/Outlet Connection | Vent | Drain | Max. cartridge diameter | |
|---|---|---|---|---|---|---|---|
| FMCH-0310 | 3(10") | 21 | 1.5" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0320 | 3(20") | 42 | 1.5" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0330 | 3(30") | 63 | 1.5" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0340 | 3(40") | 84 | 1.5" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0510 | 5(10") | 35 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0520 | 5(20") | 70 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0530 | 5(30") | 105 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0540 | 5(40") | 140 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0710 | 7(10") | 49 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0720 | 7(20") | 98 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0730 | 7(30") | 147 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" | |
| FMCH-0740 | 7(40") | 196 | 2" MNPT | 1/4"NPT | 1/2"NPT | OD 2.5" |
⑵ Base on 7 gpm per 10″length with a 25 micron wound cartridge at 2 PSID clean and a viscosity of 1 cps. Flow rates are for guide lines only.Actual flow rates are baseed on fluid, viscosity,cartridge type,micron ratings and other factors.
Installation dimension
| Model | Qty.(length) of Cartridge | A* (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
|---|---|---|---|---|---|---|
| FMCH-0310 | 3(10") | 568 | 203.5 | 114.5 | N/A | |
| FMCH-0320 | 3(20") | 822 | 203.5 | 114.5 | N/A | |
| FMCH-0330 | 3(30") | 1076 | 203.5 | 114.5 | N/A | |
| FMCH-0340 | 3(40") | 1330 | 203.5 | 114.5 | N/A | |
| FMCH-0510 | 5(10") | 603 | 242 | 140 | N/A | |
| FMCH-0520 | 5(20") | 857 | 242 | 140 | N/A | |
| FMCH-0530 | 5(30") | 1111 | 242 | 140 | N/A | |
| FMCH-0540 | 5(40") | 1365 | 242 | 140 | N/A | |
| FMCH-0710 | 7(10") | 637 | 269 | 148 | N/A | |
| FMCH-0720 | 7(20") | 891 | 269 | 148 | N/A | |
| FMCH-0730 | 7(30") | 1145 | 269 | 148 | N/A | |
| FMCH-0740 | 7(40") | 1399 | 269 | 148 | N/A |
Order information
| Model | Qty of cartridge | Cartridge size | Material | Connection | Closure | Finish |
|---|---|---|---|---|---|---|
| FMCH | 03=3round | 10=10" | 304=SS304 | 1.5T=1.5"Threaded | VC=V-clamp | PC=Polished Coat* |
| 05=5round | 20=20" | 316L=SS316L | 1.5VC=1.5"Victaulic | GB=glass bead | ||
| 07=7round | 30=30" | 1.5F=1.5"RF Flange | EP=Electro polished | |||
| 40=40" | 2T=2"Threaded | |||||
| 2VC=2"Victaulic | ||||||
| 2F=2"RF Flange |
Note. We reserve the right to modify the information contained in this pamphlet without prior notice.