Dorsan® glass microfibre cartridges offer a complete and affordable solution for liquids and gases. They offer excellent flow levels and a long useful life, with an exceptional capacity for colloidal and non-deformable particle retention. Made from borosilicate microfibres of just a few microns in length, these depth filters have a considerable retention capacity. They are the perfect pre-filters for absolute membranes.
Glass microfibre has the unique characteristic of presenting a naturally positive charge. This way, it can easily trap particles which are negatively charged, as are the majority of bacteria, endotoxins and the colloidal materials present in some liquids.
All Dorsan® filter cartridges comply with FDA food contact regulations as outlined in the U.S. Code of Federal Regulations (CFR), Title 21. The materials used to produce filter media and hardware are considered safe for use in contact with food products in accordance with the EU Directives 2002/72 / EC, 1935/2004, and/or 10/2011.
Sterile air pre-filtration
GR GLASS MICROFIBRE CARTRIDGE SPECIFICATIONS
|Pore Size μm||D||Length”||E||Adaptor||Rings/Joints||Inserts|
|DGF||0.22||D||10||E||Blank = DOE||B = Buna-N||R = Stainless|
|0.45||D||20||E||1 = DOE Flat Gasket||S = Silicone|
|0.65||D||30||E||3 = 222 w/Fin||P = Plastic foam joints|
|1.0||D||40||E||3 = 222 w/Fin||E = EPDM|
|3.0||E||6 = 226 w/Flat Cap||V = Viton®|
|5.0||E||7 = 226 w/Fin||T = Teflon® Encapsulated Viton|
|10.0||E||10 = 226 w 3 tap/Fin|
Replacement: Δp 35 Psi
SANITIZATION / STERILIZATION
In Situ Steam: 121ºC, 30min, multiple cycles.
Hot Water: 85ºC, 30min, multiple cycles
Length: < 10 to 40 inches
Outer Diameter: < 2.75 inches
Filter Medium: Glass Microfibre
Support Layers: Polyester
Cage/End Caps: Polypropylene
DOWNLOAD PDF TECHNICAL SHEET
Note. We reserve the right to modify the information contained in this pamphlet without prior notice.